Now that we have several models out, where do we go from here? Well, let’s take a look at our current timeline:

The OG 6.5

Estimated release: 9/12/25

The OG 6.5 is the same design as all of the OG’s, 4″ over the barrel and 4″ in front. The big difference is the weight, this OG 6.5 is 7.5 ounces and 130 Decibels. We were able to decrease the weight so much due to the 6.5 restrictions.

.22 Cans – The Gnat and The Midge

Estimated release: First quarter 2026

The Gnat and The Midge bring our one-piece 3D printed Titanium to .22 rimfire cartridges. The Gnat, designed for rifles, will sit at around 5.5 inches long and 1 inch diameter. It will be between 3 and 4 ounces. The Midge, designed for pistols, will be about 4.5 inches long with a 1 inch diameter, weighing in between 2 and 3 ounces.

The NHS

Estimated release: NOV 2025

The NHS (formerly Comp) brings our 3D printed Titanium suppressors to the PRS stage and hunting markets, putting all of the suppressor in front of the barrel.

The NHS will be 5 inches long with a 1.8 inch diameter and fitted with a printed-in muzzle brake, this patent-pending design continues to utilize one-piece printing while adding all the benefits of a printed in muzzle brake on the end of the suppressor.

The NHS will also feature a taper lock attachment system for muzzle side timing, making it possible to perfectly time the brake. For PRS competition, it will be available as a 6.5mm suppressor, and for hunting we will add a 30 CAL version.

The OG Magnum

Estimated release: 2026

The OG Magnum brings new dimensions to the OG specs. Instead of being split 4 inches over and 4 inches in front, the OG Magnum will feature 5 inches of baffles in front of the barrel and only 3 inches over the top. The original expansion chamber will still create a hollow tone, but the extra inch of baffles will serve to better lower the overall sound rating. The Magnum will also feature a changeable endcap. It will be for .30 caliber rifles and smaller.

The Big Stick

Estimated release: 2026

The Big Stick will be 10″ x 1.8″ with printed in muzzle brake. It will have a timing system to time the printed in side port muzzle brake. Of course it will be printed from Titanium like the rest of our cans.

The Predator

Estimated release: 2026

Our suppressor purposely designed for predator hunters. 6mm caliber with 2 inches over the barrel and 4 in front. More details to come.